CM 1-4

Horizontal, multistage pump, stainless steel (blades - deflection blades - shaft), manual suction.

Loading...
Loading...

Description

The GRUNDFOS factory-made CM type pump is a horizontal, multistage pump, stainless steel (blades - deflection blades - shaft), manual suction, direct connection of the motor rotor with the pump shaft, with a stepper motor and completely silent. The pump CM (Centrifugal Modular) has two main features, the compact size and the robust construction, where they make it able to cope with even the most demanding applications. The CM pump type is available with asynchronous short-circuit rotor motors, single-phase and three-phase, 50 or 60Hz, air-cooled. The motors that are installed on the CM pumps, are from the factory of GRUNDFOS, of high efficiency and low power consumption and are made according to the European Standards. Motor supply voltages vary, so if you are looking for a pump that operates with a power supply voltage beyond the standard (1X220V & 3X400V - 50 / 60Hz), you should contact us to let us know what is available available in the wide range of the GRUNDFOS factory. The CM pump type is also available with motors with integrated power converter (INVERTER) for maximum power and water savings during operation
Η αντλία CM (Centrifugal Modular – Φυγοκεντρική Δομοστοιχειωτή) διαθέτει δύο κύρια χαρακτηριστικά, το συμπαγές μέγεθος και τη στιβαρή κατασκευή, όπου την καθιστούν ικανή να ανταπεξέλθει και στις πιο απαιτητικές εφαρμογές. Ο τύπος αντλιών CM διατίθεται με κινητήρες ασύγχρονου βραχυκυκλωμένου δρομέα, μονοφασικούς και τριφασικούς, 50 ή 60Hz, αερόψυκτους. Οι κινητήρες που τοποθετούνται επάνω στις αντλίες CM, είναι του εργοστασίου της GRUNDFOS, υψηλής απόδοσης και χαμηλής κατανάλωσης ρεύματος και είναι κατασκευασμένη σύμφωνα με τα Ευρωπαϊκά Πρότυπα. Οι τάσεις τροφοδοσίας των κινητήρων, ποικίλουν, γι αυτό και εάν ψάχνετε για αντλία που να λειτουργεί με τάση τροφοδοσίας ρεύματος πέραν των στανταρ (1Χ220V & 3Χ400V – 50/60Hz), θα πρέπει να επικοινωνήσετε μαζί σας, για να σας ενημερώσουμε για το τι υπάρχει διαθέσιμο στην μεγάλη γκάμα του εργοστασίου της GRUNDFOS. Επίσης ο τύπος αντλιών CM διατίθεται και με κινητήρες με ενσωματωμένο μετατροπέα συχνότητας ρεύματος (INVERTER) για την μέγιστη εξοικονόμησης ρεύματος και νερού κατά την λειτουργία της.

 

Certificates:
CE,WRAS,ACS,TR,EAC

 

CM and CME pumps are available in

  • Cast iron
  • Stainless steel (stainless steel according to AISI 304 / DIN 1.4301, suitable for water and non-corrosive fluids
  • Stainless steel (stainless steel according to AISI 316 / DIN 1.4401, suitable for water and non-corrosive fluids

 

Applications
The CM or CME pump is a multi-purpose pump, it can be used:

  • For domestic use as a water pressure boosting pump
  • In the shipping industry in various applications, where the increase of pressure or the transfer of water in general is required.
  • It is compact, quiet, reliable and flexible, and thus is a great solution for any application

Features and benefits

Specifications

  • Μέγιστη Παροχή: 2,5m3/h
  • Μέγιστη Πίεση: 3,5 ατμ.
  • Ενδεικτικό Σημείο Λειτουργίας: 1,5m3/h στις 2.5 ατμ.
  • Maximum Operating Pressure (Endurance): 10 atm (refer to this when there is a pre-pressure at the pump inlet such as water supply network)
  • Στόμια Εισόδου/Εξόδου: 1″x 1″
  • Voltage Current Frequency: 220V / 50Hz
  • Ισχύς Κινητήρα Αποροφούμενη Ρ1: 424 Watts/0,6 HP
  • Ισχύς Κινητήρα Αποδιδώμενη Ρ2: 274 Watts/0,4 HP
  • Current: 2.8–3.1A
  • Degree of Protection: IP 55
  • Insulation Class: F
  • Built-in Engine Protection: PTO
  • Pumped Liquid Temperature: from -20 to 95 οC
  • Ambient temperature: from -20 to 55 οC
  • Certificates: CE,WRAS,ACS,TR,EAC

PDF & Video forms

PDF brochures

Video

CONTACT US
close slider

    en_GB